Vintage Revolution PedalPro Owner's Manual download pdf (Page 17)

Rev. 2.0 - EN EU - fw 4.22

How to Use Your Pedalino

. . . . . . . . . . . . . .

. . . . . . . . . .

Fi2

8.5 FUNCTION OF THE CONTROL PAD

The control pad (ﬁrst pad on your left) can perform different functions based

on the operating mode.

8.5.2 Customising Bypass Mode

This new feature gives you the possibility to set the Bypass Mode in two dif-

ferent ways: standard and prst 000. When the Bypass Mode is set on stand-

ard, everytime you activate the Bypass Mode you get a dry sound without

effects.

The bypassing function is replaced by the effect/s deﬁned in preset 000

which the user consider as being his basic sound (CLN->clean sound).

Since the preset 000 is fully editable, you can create the clean channel as

you wish, and recall it instantaneously with the bypass pad. In this conﬁgura-

tion the expression’s parameter is not adjustable via Expression Pedal since

the bypass is used as well for setting or removing TAP Tempo.

• With the Pedalino in browse mode, press MENU key (10) until the top line

of the display reads ‘Bypass/Clean’.

Bypass/Clean

• Press the SET key [11] to access the conﬁguration page.

Byp=standard 1/1

• To set the Bypass parameter on standard or prst 000 , use the + key [8] or

the – key [9].

• Press EXIT key [12] twice to automatically save your settings and to return

to browse mode or favourite mode.

8.5.1 Bypassing PedalPro

• To fully bypass the PedalPro, press the BYPASS/MUTE pad [13] to LEVEL 1.

The BYPASS LED [1] will light up.

On the PedalPro, you will also see that the red BYPASS indicator light is now

on. To turn the bypass mode off, simply press the BYPASS/MUTE pad [13] to

LEVEL 1 again.

LEVEL 1

LEVEL 2

LEVEL 3

Browsing Favourite Virtual

mode mode board

Switching banks

Enter Vir. Boa

Exit Virtual

Board

Bypass

Effects

Switch

Enter Virtual

Board

Tuner Tap Tempo

Bypass

Tuner

NOTE: When you are using the expression pedal to control either the Wah or

Volume effects (engaged by pad2 level 3 or pad4 level 3 respectively), and

you are switching to a different function for the expression pedal (using pad1

level 3 or pad3 level 3), the PedalPRo will freeze the wah or volume effect

to the value set with the expression pedal at the moment of switching to

the new expression pedal function. This way you will get either a static wah

or a new master volume, while using the expression pad for the other func-

tions corrisponding to pads 1 and 3. To disengage these, switch off the wah

or volume effects the same way they are engaged: select pad2 level 3 to

disengage the wah or pad4 level 3 to disengage the volume.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Comments to this Manuals

No comments

Vintage Revolution PedalPro Owner's Manual Page 17

Comments to this Manuals