Vintage Revolution PedalPro Owner's Manual download pdf (Page 8)

Rev. 2.0 - EN EU - fw 4.22

7.1 CONNECTIONS

Connecting to the PedalPro

For the proper functioning of your Pedalino Foot Controller, you must use the

supplied 5-PIN ADES™ cable. The Pedalino may NOT work with other types of

MIDI cables, although some 5-PIN MIDI cables may be compatible.

• Connect the supplied 5-PIN ADES cable to the ADES connector [17] of

the Pedalino and the ADES connector on the PedalPro’s front panel.

Connecting to the Main

• Plug the AC Adaptor to the DC connector [21] of the Pedalino, and into

a power outlet.

With the PedalPro Switched OFF

You are able to start up the Pedalino with the PedalPro either switched ON or

OFF.

If the PedalPro is switched OFF when you turn on the Pedalino, you will see

the following:

ALWAYS use the supplied AC adapter. To prevent accidental discon-

nection, especially when playing live, loop the power cord through

the cable loop [22].

7.2 SWITCHING ON

• Press the POWER switch [20]. The display will show a welcome screen and

the current ﬁrmware, before showing the following:

BEFORE switching on the Pedalino, connect the ADES cable between

the PedalPro and the Pedalino.

Calibratin

Do not press

The Pedalino is now calibrating the switching pads. Please do not touch or

press the pads until the calibration process is complete.

Waiti ng for

. . . . . Pedal

. . .

. Pro

The ADES ON/OFF LED [3] on the Pedalino will blink to indicate that the Ped-

alino is ready for the ADES connection to be established with the PedalPro.

You can now turn on the PedalPro. Once the PedalPro has started and the

ADES connection is established, the Pedalino display will look like this:

000

PurePhaser

The preset number and name indicate the preset that is currently loaded on

the PedalPro. At the same time, the display on the PedalPro will show:

S ONE *D* A

This indicates that the PedalPro can now be completely controlled using the

Pedalino, and that the controls on the PedalPro are DISABLED. This screen will

remain for as long as the PedalPro is controlled by the Pedalino. You are now

ready to go.

Setup Guide

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

Comments to this Manuals

No comments

Vintage Revolution PedalPro Owner's Manual Page 8

Comments to this Manuals